Crown Molding for Kitchen Cabinets: Styles, Sizes and How Much to Order
Quick answer: Pick crown molding from the same cabinet line and color as your cabinets so the finish matches. Choose a height that fits your ceiling gap: a 3 to 3 1/2 in. crown suits most kitchens, while a larger cove crown, or crown stacked on a base piece, fills a bigger gap to the ceiling. To find the quantity, measure every cabinet top edge that gets crown, including exposed sides, add 10 to 15% for miter cuts, and divide by 96 in. per piece.
Crown molding is the finishing touch that makes stock cabinets look custom. It caps the tops of your wall cabinets, hides the uneven line where cabinets meet the ceiling or soffit, and gives the kitchen a polished, built-in look. Here's how to choose it and order the right amount.
Why add crown molding?
- It finishes the look. Without crown, the top edge of a wall cabinet can look unfinished, especially on tall cabinets.
- It hides gaps. Ceilings are rarely perfectly level. Crown covers the uneven gap between the cabinet top and the ceiling.
- It adds height. Crown draws the eye up, so the kitchen feels taller and more upscale.
- It ties the room together. Matching crown on wall cabinets, the hood and tall pantry cabinets makes a kitchen feel designed rather than assembled.
Common crown molding styles
| Style | Look | Best with |
|---|---|---|
| Shaker or flat crown | Simple, clean stepped profile | Shaker and transitional kitchens |
| Royal or traditional crown | Classic curved profile | Traditional and transitional kitchens |
| Large cove crown | Bigger curved profile that covers a larger gap | Tall ceilings, statement kitchens |
| Crown with base | Two pieces stacked for extra height | Filling a big gap to the ceiling |
Our best-selling crown is the CNC Luxor White 96 in. Royal Crown Molding, at 3 1/2 in. high and 2 1/2 in. deep. It's a perfect match for the CNC Luxor White Shaker line and works in both traditional and transitional kitchens.
Other lines have their own crown pieces, for example: - J&K Castle Grey S5 Crown Molding with Base, a two-part profile that adds height - Fabuwood Allure Fusion X-Large Cove Crown, 5 1/2 in. high for taller gaps
How to pick the right height
Start by measuring the gap between the top of your wall cabinets and the ceiling.
- Gap of 0 to 2 in.: choose a small crown or a flat trim that tucks under the ceiling line.
- Gap of 2 to 4 in.: a 3 to 3 1/2 in. crown, like the Luxor Royal Crown, usually closes it cleanly.
- Gap of 4 to 6 in.: consider a larger cove crown or a crown-with-base profile.
- Gap of more than 6 in.: many homeowners use taller wall cabinets, add a riser or filler strip under the crown, or leave a clean open space above with a small crown on the cabinets only.
Tip: Crown doesn't have to touch the ceiling. If the ceiling is very uneven, a crown that stops a little short with a clean shadow line can look better than one forced to follow every dip.
How much crown molding do you need?
- List every edge that gets crown. That's the front of every wall cabinet run, plus any exposed side at the end of a run, plus the top of tall pantry or oven cabinets if they line up.
- Measure each edge in inches and add them together.
- Add 10 to 15% for miter cuts at corners and the occasional bad cut.
- Divide by 96 (one 8 ft. piece) and round up.
Example: - Wall cabinet run A: 120 in. front plus 12 in. exposed end - Wall cabinet run B: 84 in. front plus 12 in. exposed end - Total: 228 in. Add 15% for 262 in., divided by 96 is 2.7, so order 3 pieces. Add a fourth if you have several outside corners or a hood to wrap.
Installation tips
- Install it upside down in the saw. Crown is cut "upside down and backwards" against the saw fence at its installed angle. Practice on scrap first.
- Add a nailer strip. Many cabinet lines recommend a thin strip of wood on the top edge of the cabinet to give the crown something solid to nail into.
- Glue the miters. A little wood glue on outside corners keeps the joint tight over time.
- Finish with matching touch-up. Fill nail holes with matching filler or a touch-up marker so they disappear.
- Order everything from one line. Crown, light rail, fillers and end panels should all come from the same cabinet color for a perfect match.
Pair crown with light rail
If crown finishes the top of your wall cabinets, light rail molding finishes the bottom. It hides under-cabinet lights and gives the cabinets a furniture-style look. For example, see the Fabuwood Allure Galaxy Dove light rail.
To learn more about finishing details, read how to customize RTA cabinets with luxury finishes and our CNC Luxor cabinets buyer's guide.
FAQ
Should crown molding match my cabinets? Yes. Order crown from the same cabinet line and color so the finish and sheen match exactly.
What size crown molding is best for kitchen cabinets? A 3 to 3 1/2 in. crown works for most kitchens. Larger cove crowns or stacked crown-with-base profiles fill bigger gaps.
Does crown molding have to touch the ceiling? No. It can stop short of the ceiling with a clean reveal, which often looks better on uneven ceilings.
How long are cabinet crown molding pieces? Most cabinet crown comes in 96 in. (8 ft.) lengths.
How much extra crown molding should I order? Add 10 to 15% for miter cuts and waste, then round up to the next full piece.
Is crown molding hard to install? It takes patience and careful miter cuts. Many homeowners do it themselves, but a finish carpenter can install it quickly.
